Des-Case, Handheld Drum Toppers, 1 gpm, electric 60 Hz motor base model (for high viscosity oils up to ISO VG 460), DT01EB1LK002

Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including:

• Filtering new oil directly from the drum
• Allowing you to fill small totes
• Acting as an offline filter for critical equipment

What Is Standard?

• Automatic pressure relief valve
• Non-bypass filter heads
• Dual-stage filtration
• 6' hose assemblies with various quick connect options
• 25' power cord (for electric motors only)
• Industrial powder-coated paint
• One-year warranty

Applications

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Topping off reservoirs
• Collecting oil samples for analysis

INTENDED USE

• To be used for offline, secondary filtration and not inline filtration
• In general industrial environments, both indoors and outdoors (IP rating of 54)
• For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100°F/38°C within ambient temperature ranges of -8°F to 104°F (-22°C to 40°C)
• Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses
• This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Performance

Operating Temperatures:

• -15°F to 150°F (-26°C to 66°C) for standard unit with clear PVC hoses
• -20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic hoses and Viton® or EPDM seals

Materials:

• Frame: Aluminum
• Paint: Industrial powder coat
• Filter Heads: Aluminum
• Fittings: Zinc-plated steel and/or brass
• Pumps: Aluminum/steel
• Hoses: Clear PVC with steel wire
• Gaskets: Buna-N

Filter Indicators:

• Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief:

• Opens at 65 psi (5.49 bar)

Weight:

• Approximately 45-50 lbs (20.4-22.7Kg). Will vary depending on options selected

Dimensions:

• 24.5"L x 13.5"W x 15.4"H

Viscosity Range:

• Up to ISO VG 460 at 100°F / 38°C (2100 SSU / 450 cSt)

Filter Replacements

Replacement Filter Element Part Numbers:

Elements are sold in cases of six and can be mixed and matched.